Handheld TDS & PH Meter Pro
Digital measurement solution for rapid on-site measurement, aquaculture, water treatment and service applications.
We have specially developed an accurate high performance and multipurpose meter for on field analyses of parameters pH TDS Conductivity and ORP. These meters measure temperature and are available with a single electrode to measure all the parameters. The meters has a multi parameter option i.e. same meter can analyse ORP by just connecting an ORP electrode. Understanding the need of a multi parameter meter for onsite use we have designed a compact spill proof and high performance Multi parameter Handheld Meter.
Supplied in an attractive plastic case along with standard solutions for easy calibration.
Key features
- Microprocessor-based fast reliable and accurate measurements.
- Replaceable Electrode Module
- Waterproof Impact resistant ABS Housing
- Large LCD display for reading convenience
- Easy Single Point Calibration
- Available in a portable pack.
Technical specifications
| Model | AMAL01 |
| pH Range | (-) 2.00 to 16.00 |
| pH Accuracy | 1% |
| pH Resolution | 0.01 pH |
| ORP Range | ± 1000 mV |
| ORP Accuracy | 1% |
| ORP Resolution | 1 mV |
| Conductivity Range | 0 to 100 ms/cm |
| Conductivity Accuracy | 2% |
| Conductivity Resolution | 1μS |
| TDS Range | 0 to 66000 ppm |
| TDS Accuracy | 2% |
| TDS Resolution | 1 PPM |
| Salt Range | 0 to 50 ppt |
| Salt Accuracy | 2% |
| Salt Resolution | 1 PPM |
| Temp Range | 0 to 100 Deg C |
| Temp Accuracy | ± 0.2 |
| Temp Resolution | 0.1 Deg C |
| ATC | Yes |
| Power |
AAA (1.5V) x 4 Batteries Duracell Ultra Only |
| Dimension & Weight | 42 x 33 x 183 mm | 160 g |
| * Please order separate Electrode (AMSALE1) to measure ORP | |
Typical applications
This product is suitable for rapid on-site measurement, aquaculture, water treatment and service applications. Confirm sample compatibility, expected measuring range, calibration standards and sensor requirements before final selection.
Before ordering
Check which electrodes, probes, standard solutions, cables, holders, stirrers, software or mounting accessories are included and which are optional.
Use the instrument as part of a controlled measurement process.
Calibrate
Use suitable fresh standard solutions and follow the calibration steps in the model manual.
Prepare the sensor
Inspect, rinse and condition the electrode or sensor. Remove bubbles and deposits that may affect response.
Measure and record
Allow a stable reading, note sample temperature and document calibration and instrument identification.